Discover the recharging point with load shedding!
With Beev, install a charging point with load shedding.
Take advantage of free support from a Beev expert, who will help you make your project a reality.
Charging point with load shedding :
what is it?
While electric cars As the number of cars and hybrids on the road continues to rise year on year, the number of charging points in France must also keep pace, so that every motorist can recharge their vehicle in the best possible conditions.
A recharging point with load shedding is a system that reduces the electrical power of the point when it is not in use. This system cuts off the electrical current when the charging point is no longer in use.
Hundreds of companies place their trust in us
...and the press is talking about us
Our certifications and standards
Useful resources for your bollard installation project
The best charging point installers by city and region
More than 5,000 customers have placed their trust in us
Reviews
After 3 weeks of use, I'm completely satisfied with this bollard. It's very discreet and can be controlled remotely using an intuitive application.
Very good operation. Installation of a charging point. Very satisfied with the result.
Many thanks to Mr Ulysse DESTOM for his support. He was able to answer all our questions, even late at night. An exceptional follow-up, thank you again!
Meeting deadlines. Clean work.
Dynamic company motivated by customer satisfaction: very quick turnaround, good value for money for the products offered and commitments kept. I highly recommend them.
Hello, Are you looking for a charging point to recharge your vehicle at home? Look no further than beev, great value for money and incredibly efficient service before, during and after! I'd recommend beev with my eyes closed and I really don't regret it. A big thank you to Mr Emmanuel for his professionalism! And well done to the installer who did a great job. Neat work, thank you very much 🙏
Do you have a question about the load shedding system? Perhaps we already answered already answered it!
Having a charging point with the load-shedding system, can be useful if you want to reduce your energy consumption. Here are some of the advantages:
- A charging point with load shedding avoids over-consumption of energy. Because load shedding automatically adapts to all the electrical appliances in your home, the amount of energy delivered by the terminal will not be excessive.
- Load shedding helps to protect your home's electrical system and the user. When a large number of electrical appliances are switched on, load shedding will prevent power cuts and blow fuses.
- Your initial energy subscription will be maintained: as load shedding is programmed to prevent over-consumption of energy, you won't need to take out a more expensive subscription with your energy supplier.
In terms of operation, electrical installations are protected by a number of safety devices, in particular circuit breakers. These are useful for protecting you against overloads. When the power is cut off and the circuit-breaker trips, this happens when certain electrical appliances consume much more energy than expected.
To prevent this from happening, load shedding can be programmed in 3 different ways:
- Cascading load shedding This will gradually cut the power supply to all non-priority electrical appliances, to provide your vehicle with adequate charging power.
- Cyclic load shedding On this 2nd device, the terminal will cut the power supply to the various rotating circuits, so as not to penalise the same devices.
- Mixed load shedding : Mixed load shedding combines cascade and cyclic load shedding, as explained above. When cyclic load shedding is insufficient, cascade load shedding intervenes to transmit sufficient electricity and recharge your electric vehicle.
According to Article R. 4544-9 of the French Labour Code, any installation of charging point of more than 3.7 kW must be installed by an electrician who is an expert in recharging stations. The law requires these professionals to have undergone training delivered by a dedicated organisation (Qualifelec, etc.). IRVE).
When it comes to choosing an installer, Beev has already drawn up a list of quality, reliable professionals to guarantee you a trouble-free installation.
On most terminals, load-shedding modules are often optional, while on others the system is already integrated:
- La Wallbox Copper SB (with the addition of the PowerBoost module for load shedding)
- The EO mini pro 2
- eNext S (optional load-shedding module)
- Schneider EVlink Smart
- The Witty (optional module)
- Sobem sCAME Wallbox WB (with Power Management option)
In addition to intelligent load shedding, they are connected charging stations to the internet. This feature allows you to better manage your energy consumption in real time, and to control the duration and times of recharges remotely.
If you would like more information on this subject, please consult the top 10 best charging points.
